Inspiration

The idea for this project was inspired by current technologies that enable people with disabilities to move. Current trends emphasize helping those with limited to no leg motion and horses, but they usually don't consider a user with unrestricted leg mobility and no horse. We challenged ourselves to bridge this gap in the market by developing a design that helps the horseless walk.

What it does

The Horseless Chariot is a transportation device and familiar. The user can move by means of stepping on the board to generate a forward force and tilt the remote to turn which is step mode. The user can also move by means of leaning on the board to move in that direction which is lean mode.

How we built it

We designed a lightweight chassis out of 80/20 aluminum extrusions and right angle brackets. The drive system and electronics were borrowed from previous projects which are wired underneath the chassis frame. The wii controller is mounted to a custom 3d printed handle and the balance board is bolted to the chassis.

Challenges we ran into

We ran into trouble with designing the mount for the wii controller. Our 3d printer volume has a limited print volume so we had to design a mount that was constrained to the printer. We wanted to force the user to completely step in

Accomplishments that we're proud of

Speaks for itself.

What we learned

There are ample resources for making retro hardware usable. We found the useful repo Bluepad32 which allowed us to use the Wii devices.

What's next for Horseless Chariot

The Horseless Chariot will remain as it is: a chariot without a horse.

Built With

  • 8020
  • angle-grinder
  • arduinoide
  • bambulab
  • bluepad32
  • duct-tape
  • esc
  • esp32wroom
  • gemini
  • hacksaw
  • metal
  • onshape
  • platformio
  • tlc
  • vscode
  • wii
  • wiibalanceboard
  • wiimote
Share this project:

Updates

Submission history