GovNaB Desktop Voice Assisstant

To run this Project please follow these steps

A. Pre-Requisites

  1. Open command prompt or powershell window.
  2. Type this command
    git clone https://github.com/YashasviBhatt/GovNaB_Desktop_Voice_Assisstant
    and press enter.
  3. Go inside the Cloned Repository folder and open command-prompt or powershell window.

B. Executing the Project

Recommended Method

  1. Make sure the location where your terminal is open should be inside the Cloned repository Folder.
  2. Type
    pip install virtualenv
    and press enter.
  3. Now, type
    .\GovNaB\Scripts\activate
    and press enter.
    • if you are having Error while activating virtual environment then open command prompt or powershell window as administrator.
    • now type
      set-executionpolicy remotesigned
      press enter and repeat step 3.
  4. After activating virtual environment, the path should look like this
    (GovNaB) .\<your-path>\GovNaB_Desktop_Voice_Assisstant.
  5. Run the Project using this
    python GovNaB.py.
  6. If you would like to see the commands which works properly then open workingCommands.csv file.

Alternate Method

In case you don't want to use virtual environment which has all the required libraries installed then follow these steps:

  1. Make sure the location where your terminal is open should be inside the Cloned repository Folder.
  2. Type
    pip install -r requirements.txt
    and press enter in either command_prompt or powershell window as administrator.
  3. Now install PyAudio using following commands,
    • pip install pipwin
    • pipwin install pyaudio This will install PyAudio in your system.
  4. After Installing all the required libraries execute the program
    python GovNaB.py.

Built With

Share this project:

Updates