ComforTemp

Inspiration

In one space (such as a room), the temperature is still varied in different spots. However, the feeling and sensation of human are not as exactly as the machine, especially when we want to control the temperature system in this space.

What it does

The product uses three temperature sensor to give a demo. It would take the temperature at different locations and show which location has a temperature that is significantly higher or lower than others. With the signal this system gives, changes can apply to the air control system, so that create a better feeling. It also helps reduces waste if the air conditioner is turned at too high temperature.

How we built it

Use Arduino Glove, combined with the Arduino code. The product uses three temperature sensor to give a demo. It would analyze the temperature at different locations. Each location has a signal light, if it's temperature is too high or too low, signal light would light up.

Challenges we ran into

We tried to make Arduino connected with some signal projector so that we can receive a signal from a phone or computer. But we failed with that.

Accomplishments that we're proud of

We made our final product successfully.

What we learned

We learned the setup of the circuit and solved several problems to make the circuit work.

What's next for ComforTemp

ComforTemp will connect with the signal system to further remote and control the temperature

Built With

• arduino